Raindrip 016010T Polyethylene Drip Irrigation Tubing - 1/4 in. Diameter x 100 ft. Length

The Raindrip 016010T Polyethylene Drip Irrigation Tubing, also known as micro tubing or spaghetti tubing, is designed to supply water directly to plants as a feeder line or main line in smaller drip systems.

• Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system.
• Works in a variety of areas, from small to large, flat or sloped; transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
• Tubing outside diameter (OD) is 0.250 inch, internal diameter (ID) is 0.170 inch; connect to main supply line with 1/4 inch micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant.
• Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
• To use as a feeder line, connect to the main line with a micro fitting; to use as a main line, connect 1/4 inch lines together with micro fittings; Tubing coil comes shrinkwrapped for convenience; easy to access as needed.
• Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content.
• Works with Raindrip products and other products with compatible connection type.
• Maximum PSI (Pressure Rating): 40 PSI.
• Tubing Length: 100 ft.
• Tubing Material: Polyethylene.
• Tubing Size/Outer Diameter: 1/4 inch.